PRO Bino Harness
More Vias Size XL Arriving June 2020 See More
Drawing inspiration from the original KUIU Bino Harness and our demand for relentless innovation, the new full-featured PRO Bino Harness is built for full binocular protection and ease of use. We incorporated a fully enclosed lid, so your optics get zero exposure to rain, snow, dust and debris. The lid may be quietly opened or closed with one-hand operation, thanks to the fleece-lined fabric and the moldable case opening (Patent Pending) that forms to the exact profile of your binoculars.
The primary harness straps connect directly to the case on the top and sides, while secondary straps connect to your binos—this allows the pouch to stay comfortably in place while glassing or while the binos are detached from the rigging for tripod use. The harness is comfortable, stays in position and may be worn more loosely than the original KUIU Bino Harness.
The next-to-body fabric is constructed of a highly breathable and durable spacer air mesh. The outer facing fabric is built from a TORAY three-layer laminated fabric that’s durable, waterproof and quiet—the same material used for Kutana Storm Shell rain gear.
The PRO Bino Harness is available in two sizes to accommodate a broad range of binocular sizes and brands. Included are three lightweight stackable foam shims that insert into the bottom of the case to position your optics to the perfect height.
The PRO Bino Harness is Hydration Rig compatible. It’s the perfect combo for closing the gap on a stalk or hikes when only binos, hydration and minimal gear are needed.
• Size L: (L) 6.69 in x (W) 5.9 in x (D) 2.7 in (17 cm x 15 cm x 7 cm)
• Size XL: (L) 7.87 in x (W) 5.9 in x (D) 3.34 in (20 cm x 15 cm x 8.5 cm)
• Two side accessory pockets
• Overlapped forward-folding lid
• Zippered front pocket
• Spacer air mesh next-to-body lining
• Anti-odor treatment on chest and back panels
• Internal foam shims for optimal bino height
• Adjustable-cinch lid
• Compatible with KUIU bino harness accessories
• Hook-and-loop bottom accessory attachment panel
• K-DWR treated
• Pro Hydration Rig compatible (sold separately)
• L- Binocular height 6.75” or less (fits most 10x42 and smaller binoculars)
• XL- Binocular height 6.75-8” (fits most 10x50, 12x50, 15x56 and rangefinding binoculars)
Keep your small items conveniently in reach and organized with this Bino Harness Accessory Pocket. The pocket securely connects to the hook-and-loop patch located at the bottom of your KUIU Bino Harness and tethers to the cording loops. Perfect for stowing calls, small electronics, eyeglasses, sunglasses, or other items that need easy access. • Weighs 2.2 oz (62 g) • Fits current model KUIU bino harness systems • K-DWR treated • Waterproof YKK zipper Valo Arriving July 2020
Specifically designed as an added accessory for the PRO Bino Harness and to stow the Platypus-KUIU Hoser hydration system. It fits inside a larger pack and easily attaches to the PRO Bino Harness for a final stalk or for hikes when only binos, hydration, and minimal gear are needed. • Weight: 6.0 oz (170 g) • 366 cu in internal storage • Only compatible with PRO Bino Harness • Houses Platypus-KUIU Hoser (3 Liter) • Easily stows inside larger pack as hydration bag holder
330D CORDURA® fabric constructed around an EVA foam provides a lightweight and comfortable solution for long hours behind the glass, or protection while kneeling. Either store between your bag and frame, or strap it to your bag with the attached webbing loops.
• 1.9 oz
• Easily stores between frame and pack bag
• Size: 8.8 in x 14.5 in x 0.7 in
Valo Arriving December 2020